Chapter 24
ACL Editor
Rules Windows
OL-4015-08
How Do I Modify an Existing Firewall to Permit Traffic from a New Network
•
or Host?
How Do I Configure NAT Passthrough for a Firewall?
•
How Do I Permit Traffic Through a Firewall to My Easy VPN Concentrator?
•
How Do I Associate a Rule with an Interface?
•
How Do I Disassociate an Access Rule from an Interface
•
How Do I Delete a Rule That Is Associated with an Interface?
•
How Do I Create an Access Rule for a Java List?
•
These windows let you examine, create, edit, and delete rules.
Access Rules window—Access rules most commonly define the traffic
•
that you want to permit or deny entry to your LAN or exit from your
LAN, but they can be used for other purposes as well.
NAT Rules window—NAT rules are used to specify a set of addresses to
•
translate.
IPSec Rules window—IPSec rules are extended rules used in IPSec
•
policies to specify which traffic will be encrypted for VPN connections.
Unsupported Rules window—Unsupported rules contain syntax or
•
keywords that SDM does not support. Unsupported rules may affect the
way the router operates, but are marked as read-only by SDM.
Externally Defined Rules window—Externally defined rules are those
•
that SDM was not used to create.
SDM Default Rules window—SDM default rules are pre-defined access
•
rules. They are used in guided first-time configurations, and you can use
them in configurations that you create.
NAC Rules window. NAC rules are used in the NAC exception policy to
•
specify hosts that are to be exempted from the NAC validation process.
They are also used to define the hosts or networks in which posture
agents are installed.
Cisco Router and Security Device Manager Version 2.2 User's Guide
Rules Windows
24-3