How Do I Enable Or Disable An Interface; How Do I View The Ios Commands I Am Sending To The Router - Cisco OL-4015-08 User Manual

How Do I...
Step 5

How Do I Enable or Disable an Interface?

Step 1
Step 2
Step 3
Step 4

How Do I View the IOS Commands I Am Sending to the Router?

Step 1
Step 2
Step 3
Cisco Router and Security Device Manager Version 2.2 User's Guide
2-12
Click Start Monitoring to see statistics for all selected data items.
The Interface Details screen appears, displaying the statistics you selected. The
screen defaults to showing real-time data, for which it polls the router every
10 seconds. If the interface is up and there is data transmitting across it, you
should see an increase in the number of packets and bytes transferred across the
interface.
You can disable an interface without removing its configuration, and you can
reenable an interface that you have disabled.
Click Interfaces and Connections in the category bar.
Click the Edit Interfaces and Connections tab.
Select the interface that you want to disable or enable.
If the interface is enabled, the Disable button appears below the Interface List.
Click that button to disable the interface. If the interface is currently disabled, the
Enable button appears below the Interface List. Click that button to disable the
interface.
If you are completing a Wizard to configure a feature, you can view the Cisco IOS
commands that you are sending to the router when you click Finish.
From the SDM Edit menu, select Preferences.
Check Preview commands before delivering to router.
Click OK.
Chapter 2 LAN Wizard
OL-4015-08