Table of Contents
Advertisement
Chapter 21
Quality of Service
Edit QoS Class
Add this class to the policy
Protocol/Application
OL-4015-08
Queuing
This column lists the queuing type, either bandwidth or priority. Class Based
Weighted Fair Queuing (CBWFQ) defines two types of Low Latency Queuing
methods—bandwidth and priority.
Priority—Priority ensures a fixed amount of bandwidth for whatever
•
bandwidth value is configured for the QoS class
Bandwidth—Bandwidth queuing promises a minimum amount of bandwidth.
•
The traffic may at time receive more bandwidth, but the bandwidth never
drops below the minimum.
Percent
If Priority queuing is used, there is a percent value in this column. This column is
empty if Bandwidth queuing is used.
Remaining Percent
If Bandwidth queuing is used, there is a percent value in this column. This column
is empty if Priority queuing is used.
DSCP
The DSCP marking selected for this QoS class.
This window allows you to edit
Check this option to include the selected
is not checked, then the selected QoS class is marked as Disabled in the Edit QoS
Policy window.
This area lists all the default protocols configured for the selected QoS class. You
can add or delete protocols.
Cisco Router and Security Device Manager Version 2.2 User's Guide
QoS
class attributes of the selected traffic type.
QoS
class in QoS policy. If this option
Edit QoS Policy
21-15
Advertisement
Table of Contents
Troubleshooting
