Crypto Map Wizard: Peers; Crypto Map Wizard: Transform Set - Cisco OL-4015-08 User Manual

Edit Site-to-Site VPN

Crypto Map Wizard: Peers

Specify Peers
To remove a peer from the current list:

Crypto Map Wizard: Transform Set

Select Transform Set
Details of Selected Transform Set
Cisco Router and Security Device Manager Version 2.2 User's Guide
8-62
A crypto map includes the names or IP addresses of the peers involved in the
security association. This screen allows you to add and remove peers associated
with this crypto map. Multiple peers provide the router with multiple routes for
encrypted data.
Enter the IP address or host name of the peer devices in the IP Address or
Hostname field. Then click Add to add it to the current list of peers.
Select the peer from the Current List, and click Remove.
Use this window to select the transform set used in the crypto map.
The devices at both ends of the VPN connection must use the same transform set.
If you want to configure a crypto map with multiple transforms sets to ensure that
the router can offer one that the peer it is negotiating with will accept, exit the
wizard, uncheck Use Add Wizard, and click Add New Crypto Map....
Select a transform set from this list to add to the crypto map.
This shows the name, encryption, authentication characteristics, and other
parameters of the selected crypto map.
If this icon appears next to the transform set, it is read-only, and it cannot
be edited.
Chapter 8 Site-to-Site VPN
OL-4015-08