Aaa Server Groups Window - Cisco OL-4015-08 User Manual

AAA Servers and Groups
TACACS+ Server/ RADIUS Server
Timeout (seconds)
Key
Select the source interface

AAA Server Groups Window

Group Name
Cisco Router and Security Device Manager Version 2.2 User's Guide
26-28
Click the appropriate button to specify the server type for which you are setting
global parameters. If you select TACACS+ Server, the parameters will apply to all
communication with TACACS+ servers that do not have server specific
parameters set. If you select RADIUS Server, the parameters will apply to all
communication with RADIUS servers that do not have server specific parameters
set.
Enter the number of seconds to wait for a response from the RADIUS or
TACACS+ server
Enter the encryption key for all communication between the router and the
TACACS+ or RADIUS servers.
Check this box if you want to specify a single interface on which the router is to
recieve TACACS+ or RADIUS packets.
Interface
Select the router interface on which the router is to recieve TACACS+ or RADIUS
packets.If the Select the source interface box is not checked, this field will be
disabled.
This window displays the AAA server groups configured on this router. If no
AAA servers have been configured, this window is empty.
The name of the server group. Server group names allow you to use a single name
to reference multiple servers.
Chapter 26 Authentication, Authorization, and Accounting
OL-4015-08