Cisco OL-4015-08 User Manual page 272

Create an Easy VPN Server
Browser Proxy Settings Name
Proxy Settings
Step 1
Step 2
Step 3
Step 4
Step 5
Cisco Router and Security Device Manager Version 2.2 User's Guide
10-118
If you are adding browser proxy settings, enter a name that will appear in
drop-down menus listing browser proxy settings. If you are editing browser proxy
settings, the name field is read-only.
Choose one of the following:
No Proxy Server
•
You do not want clients in this group to use a proxy server when they use the
VPN tunnel.
Automatically Detect Settings
•
You want clients in this group to automatically detect a proxy server when
they use the VPN tunnel.
Manual Proxy Configuration
•
You want to manually configure a proxy server for clients in this group.
If you choose Manual Proxy Configuration, follow these steps to manually
configure a proxy server:
Enter the proxy server IP address in the Server IP Address field.
Enter the port number that proxy server uses for receiving proxy requests in the
Port field.
Enter a list of IP addresses for which you do not want clients to use the proxy
server.
Separate the addresses with commas, and do not enter any spaces.
If you want to prevent clients from using the proxy server for local (LAN)
addresses, check the Bypass proxy server for local address check box.
Click OK to save the browser proxy settings.
Chapter 10 Easy VPN Server
OL-4015-08