Edit Easy Vpn Remote; Summary Of Configuration - Cisco OL-4015-08 User Manual

Create Easy VPN Remote
Note

Summary of Configuration

Note
Cisco Router and Security Device Manager Version 2.2 User's Guide
9-82
With the automatic setting, the VPN tunnel is established automatically when the
Easy VPN configuration is delivered to the router configuration file. However,
you will not be able to control the tunnel manually in the VPN Connections
window. The Connect or Disconnect button is disabled when this Easy VPN
connection is chosen.
With the traffic-based setting, the VPN tunnel is established whenever outbound
local (LAN side) traffic is detected.
The option for traffic-based activation appears only if supported by the Cisco IOS
image on your router.
This window shows you the Easy VPN configuration that you have created, and it
allows you to save the configuration. A summary similar to the following appears:
Easy VPN tunnel name:test1
Easy VPN server: 222.28.54.7
Group: myCompany
Key: 1234
Control: Auto
Mode: Client
Outside Interface: BVI222
Inside Interfaces: Dialer0
You can review the configuration in this window and click the Back button to
change any items.
Clicking the Finish button writes the information to the router's running
configuration, and, if the tunnel has been configured to operate in automatic
mode, the router attempts to contact the VPN concentrator or server.
If you want to change the Easy VPN configuration at a later time, you can make
the changes in the Edit Easy VPN Remote window.
In many cases, your router establishes communication with the Easy VPN server
or concentrator after you click Finish, or after you click Connect in the Edit Easy
VPN Remote window or VPN Connections windows. However, if the device has
been configured to use XAuth, it challenges the router for a username and
password. When this happens, you must first supply a Secure Shell (SSH) login
Chapter 9 Easy VPN Remote
OL-4015-08