Logging - Cisco OL-4015-08 User Manual

Chapter 16 Security Audit
Logging Page
IP Address/Hostname Table
Add... Button
Edit... Button
Delete Button
Set logging level Field
OL-4015-08
This screen lets you configure the router log by creating a list of syslog servers
where log messages will be forwarded, and by setting the logging level, which
determines the minimum severity a log message must have in order for it to be
captured.
This table displays a list of hosts to where the router log messages will be
forwarded. These hosts should be syslog servers that can trap and manage the
router log messages.
Click this button to display the IP Address/Host Name screen, letting you add a
syslog server to the list by entering either its IP address or host name.
Click a syslog server in the table to select it, and click this button to display the
IP Address/Host Name screen, letting you edit the IP address or host name of the
selected syslog server.
Click a syslog server in the table to select it, and click this button to delete the
selected syslog server from the table.
In this field, select the minimum severity level that a router log message must have
in order for it to be trapped and forwarded to the syslog server(s) in the table on
this screen. A log message severity level is shown as a number from 1 through 7,
with lower numbers indicating more severe events. The descriptions of each of the
severity levels are as follows:
0 - emergencies
–
System unusable
1- alerts
–
Cisco Router and Security Device Manager Version 2.2 User's Guide
Logging Page
16-31