Cisco OL-4015-08 User Manual page 79

Chapter 4 Edit Interface/Connection
Details About Interface
OL-4015-08
If SDM is running on a Cisco 7000 router, you will be able to create a connection
only on Ethernet and Fast Ethernet interfaces.
IP Address
This column can contain the following types of IP addresses:
The configured IP address of the interface.
•
DHCP Client—The interface receives an IP address from a Dynamic Host
•
Configuration Protocol (DHCP) server.
IP address negotiated—The interface receives an IP address via negotiation
•
with the remote device.
IP unnumbered—The router will use one of a pool of IP addresses supplied
•
by your service provider for your router, and for the devices on the LAN.
Not Applicable—The interface type cannot be assigned an IP address.
•
Type
The Type column displays the interface type, such as Ethernet, serial, or ATM.
Slot
The number of the physical slot in the router that the interface is installed in. If
SDM is running on a Cisco 1710 router, the slot field will be empty.
Status
This column shows whether this interface is up or down. The green icon with the
upward-pointing arrowhead indicates the interface is up. The red icon with the
downward-pointing arrowhead indicates that the interface is down.
Description
This column contains any descriptions provided for this connection.
This area of the window displays association and, if applicable, connection details
about the interface selected in the Interface List. Association details include such
information as Network Address Translation (NAT), Access, and inspection rules,
IPSec policies, and Easy VPN configurations. Connection details include IP
address, encapsulation type, and DHCP options.
Cisco Router and Security Device Manager Version 2.2 User's Guide
4-3