Authentication - Cisco OL-4015-08 User Manual

Connection: (AUX Backup)
Clear Line
IP Address
Backup Details

Authentication

Cisco Router and Security Device Manager Version 2.2 User's Guide
4-50
Click this button to clear the line. You should clear the line after creating an async
connection so that interesting traffic triggers the connection.
Select either Static IP address, IP Unnumbered or IP Negotiated. If you select
Specify an IP address, complete the fields below.
IP Address
Enter the IP address for this point-to-point subinterface. Obtain this value from
your network administrator or service provider. For more information, refer to
Addresses and Subnet
Subnet Mask
Enter the subnet mask. The subnet mask specifies the portion of the IP address
that provides the network address. This value is synchronized with the network
bits. Obtain the value of the subnet mask or the network bits from your network
administrator or Internet service provider.
Subnet Bits
Alternatively, enter the
provide the network address.
Click this button to display the
configure dial-backup information for this connection. This information is
mandatory for this type of connection, and an error will be displayed if you try to
complete the connection configuration without entering dial-backup
configuration information.
Click this button if you need to enter
Masks.
network bits to specify how many bits in the IP address
Backup Configuration
CHAP
Chapter 4 Edit Interface/Connection
screen, which lets you
or PAP authentication information.
IP
OL-4015-08