Add Or Edit Easy Vpn Remote - Cisco OL-4015-08 User Manual

Chapter 9 Easy VPN Remote

Add or Edit Easy VPN Remote

Note
Note
Name
Mode
OL-4015-08
Use this window to configure your router as an Easy VPN client. Your router must
have a connection to an Easy VPN concentrator or server on the network.
This window appears if the Cisco IOS image on your router supports Easy VPN
Client Phase II.
The Cisco Easy VPN Remote feature implements the Cisco
which allows most VPN parameters to be defined at a VPN remote access server.
This server can be a dedicated VPN device, such as a VPN 3000 concentrator or
a Cisco PIX Firewall, or it can be a Cisco IOS router that supports the Cisco Unity
Client protocol.
If the Easy VPN server or concentrator has been configured to use XAuth, it
•
requires a username and password whenever the router establishes the
connection, including when you deliver the configuration to the router, and
when you disconnect and then reconnect the tunnel. Find out whether XAuth
is used and the required username and password.
If the router uses Secure Shell (SSH) you must enter the SSH login and
•
password the first time you establish the connection.
Enter a name for the Easy VPN remote configuration.
Client—Choose Client if you want the PCs and other devices on the router's
inside networks to form a private network with private IP addresses. Network
Address Translation (NAT) and Port Address Translation (PAT) will be used.
Devices outside the LAN will not be able to ping devices on the LAN or to reach
them directly.
Cisco Router and Security Device Manager Version 2.2 User's Guide
Edit Easy VPN Remote
Unity Client protocol,
9-89