Add Or Edit A Management Policy - Cisco OL-4015-08 User Manual

Chapter 23 Router Properties
Edit Button
Delete Button
Apply Button
Discard Changes Button

Add or Edit a Management Policy

Type
IP Address/Subnet Mask
Interface
OL-4015-08
Click to edit a management policy, and specify the policy in the Edit a
Management Policy window.
Click to delete a selected management policy.
Click to apply changes you have made in the Add or Edit a Management Policy
window to the router's configuration.
Click to discard changes you have made in the Add or Edit a Management Policy
window to the router's configuration. The changes you made are discarded, and
removed from the Configure Management Access Policies window.
Use this window to add or edit a management policy.
Specify whether the address you provide is the address of a host or a network.
If you selected Network in the Type field, enter the IP address of a host, or the
network address and subnet mask. For more information, see'
Subnet Masks.
Select the interface through which you want to allow management traffic. The
interface should be the most direct route from the host or network to the local
router.
Cisco Router and Security Device Manager Version 2.2 User's Guide
VTYs
IP Addresses and
23-17