Cisco OL-4015-08 User Manual page 77

Add
Edit
OL-4015-08
Edit Interface/Connection
This window displays the router's interfaces and connections. The window also
enables you to add, edit, and delete connections, and to enable or disable
connections.
Clicking the Add button displays a drop-down menu. This menu will always have
options to add a new loopback or tunnel interface, and if there are switch ports
present on the router, this menu will have an option to add a new VLAN. When
you select an unconfigured interface, and click Add, the menu contains choices
for adding a connection on that interface.
If you want to reconfigure an interface, and see no choices except Loopback and
Tunnel when you click Add, select the interface and click Delete. All the types of
connections available for that kind of interface will appear in the Add menu. Click
Available Interface Configurations
an interface.
When you select an interface and click Edit, a dialog appears. If the interface is
a supported and configured interface and is not a switch port, the dialog will have
a Connection tab, an Association tab, a NAT tab, and a General tab. If the interface
is not supported, the dialog will have an Association tab, a NAT tab, and a General
tab. If you select a switch port, the Edit Switch Port dialog appears. The Edit
button will be disabled if the interface is supported and unconfigured.
Cisco Router and Security Device Manager Version 2.2 User's Guide
C H A P T E R
to see what configurations are available for
4
4-1