Welcome To The Easy Vpn Server Wizard; Interface And Authentication - Cisco OL-4015-08 User Manual

Create an Easy VPN Server
Create an Easy VPN Server
Launch the Easy VPN Server Wizard Button

Welcome to the Easy VPN Server Wizard

Interface and Authentication

Details
Authentication
Cisco Router and Security Device Manager Version 2.2 User's Guide
10-106
Click to Create an Easy VPN server configuration on your router.
Click to start the wizard.
This window summarizes the tasks you will perform when using the wizard.
This window lets you choose the interface on which you want to configure the
Easy VPN Server.
If you choose an interface that is already configured with a site-to-site IPSec
policy, SDM displays a message that an IPSec policy already exists on the
interface. SDM uses the existing IPSec policy to configure the Easy VPN Server.
If the chosen interface is part of an Easy VPN Remote, GREoIPSec, or DMVPN
interface, SDM displays a message to choose another interface.
Click this button to obtain details about the interface you choose. The details
window shows any access rules, IPSec policies, NAT rules, or inspection rules
associated with the interface.
This button is dimmed when no interface has been chosen.
Choose preshared keys, digital certificates, or both.
If you choose preshared keys, you must enter a key value when you configure the
Add Group Policy general setup window.
If you choose digital certificates, the preshared keys fields does not appear in the
Add Group Policy general setup window.
Chapter 10 Easy VPN Server
OL-4015-08