Cisco OL-4015-08 User Manual page 328

IPSec Rules
Source
Destination
Service
What Do You Want to Do?
If you want to:
See the access rule entries for a
particular rule.
Add an IPSec rule.
Delete an IPSec rule.
Delete a particular rule entry.
Apply an IPSec rule to an interface.
Cisco Router and Security Device Manager Version 2.2 User's Guide
13-44
An IP address or keyword that specifies the source of the traffic. Any specifies
that the source can be any IP address. An IP address in this column may appear
alone, or it may be followed by a
specifies the portions of the IP address that the source IP address must match. For
more information, see
An IP address or keyword that specifies the destination of the traffic. Any
specifies that the destination can be any IP address. An IP address in this column
may appear alone, or it may be followed by a
wildcard mask specifies the portions of the IP address that the destination IP
address must match.
The type of traffic that the packet must contain.
Do this:
Select the rule in the rule list. The entries for that rule appear
in the lower box.
Click Add, and create the rule in the rule window displayed.
Select the rule in the rule list, and click Delete.
Select the rule in the rule list, and click Edit. Then, delete the
entry in the rule window displayed.
Apply the rule in the interface configuration window.
wildcard mask. If present, the wildcard mask
IP Addresses and Subnet
Chapter 13
Masks.
wildcard mask. If present, the
IP Security
OL-4015-08