Cisco OL-4015-08 User Manual page 444

IDS Network Module Management
Date & Time
IP CEF Setting
IDS NM Initial Setup
Refresh
Cisco Router and Security Device Manager Version 2.2 User's Guide
20-6
If this row contains an X icon in the Action column, the router's clock
settings have not been configured. Double-click on this row, and enter time
and date settings in the Date and Time Properties window.
If this row contains an X icon in the Action column, Cisco Express
Forwarding (CEF) has not been enabled on the router. Double-click on this
row, and click Yes to enable IP CEF on the router.
If this row contains an X icon in the Action column, SDM has detected that
the IDS Network Module's default IP address has not been changed.
Double-click on this row, and SDM will prompt you to open a session to
the IDS module and complete configuration.You can use
this session.
For more information on configuring the IDS module, refer to the documents at
the following link.
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/csids/csids10/index.htm
After you have fixed configuration settings, you can click this button to
refresh the checklist. If an X icon remains in the Action column, a
configuration setting has still not been made.
Chapter 20 Network Module Management
Telnet or SSH for
OL-4015-08