Network Module Management; Ids Network Module Management - Cisco OL-4015-08 User Manual

IDS Network Module Management

IDS Network Module Control Buttons
OL-4015-08

Network Module Management

If the router has network modules that are managed by other applications, such as
Intrusion Detection System (IDS), SDM provides a means for you to launch those
applications.
If a Cisco IDS Network Module is installed on the router, this window displays
basic status information for it. If the IDS Network Module has been configured,
you will also be able to start the Intrusion Detection Device Manager (IDM)
software on the IDS Network Module, and select the router interfaces that you
want the IDS Network Module to monitor from this window.
If SDM detects that the IDS Network Module has not been configured, it prompts
you to open a session to the network module so that you can configure it. You can
use Telnet or SSH for this session.
SDM enables you to issue a number of basic commands to the IDS Network
Module from this window.
Reload
Click to reload the IDS network module operating system.
Cisco Router and Security Device Manager Version 2.2 User's Guide
C H A P T E R
20
20-1