Changing The Rear Wheel Bearing - Husqvarna FE 450 2016 Repair Manual

14.8.10

Changing the rear wheel bearing

Preparatory work
Raise the motorcycle with a lift stand.(� p. 14)
Remove the rear wheel. (�
Main work
(FE EU/ AU, FE 450/501 US)
Remove shaft seal ring
Remove lock ring @.
Remove shaft seal ring@).
Using a suitable tool, press bearing
inside to the outside.
Remove spacing tube
Using a suitable tool, press bearing
inside to the outside.
Check spacer washer @ for damage and wear.
If the spacer washer is damaged or worn:
Replace the spacer washer.
p. 125)
O.
C,
out from the
0.
(D
out from the
14 WHEELS
137