Checking The Transmission - Husqvarna FE 450 2016 Repair Manual

f
0 (;)
0 6D
J I
Main work
-
Secure the countershaft in the bench vise with the toothed end facing downward.
Guideline
I Use soft jaws.
O
-
Mount needle bearing
facing downward.
-
Mount stop disk@) and lock ring
-
Mount the sixth-gear sliding gear
(D
-
Mount lock ring and stop disk@.
C,
-
Mount needle bearing
-
Mount needle bearing Ci) and the third-gear idler gear
48
-
Mount stop disk and lock ring G).
-
Mount the fifth-gear sliding gear
Gs,,
-
Mount needle bearing
-
Finally, check all the gear wheels for smooth operation.
18.4.41

Checking the transmission

Condition
The transmission has been disassembled.
•
e
• • e •
J �
I
1 '
8
and second-gear idler gear
C,.
0
with the shift groove facing up.
and the fourth-gear idler gear
4D
with the shift groove facing down and stop disk
49
first-gear idler gear with the recess facing down, and stop disk G).
J
•
i
I
304685-11
onto the countershaft with the protruding collar
@)
with the collar facing up.
48
with the collar facing down.
18 ENGINE
e.
225