Husqvarna FE 450 2016 Repair Manual page 140

14 WHEELS
138
Position spacer washer @.
(D
Press new bearing
the inside.
Info
Only press the bearing in via the outer ring oth­
erwise the bearing will be damaged when it is
pressed in.
Clean, grease, and mount spacing tube (3.
I
Long-life grease (il!:!l
C,
Press new bearing
the inside.
Info
Only press the bearing in via the outer ring oth­
erwise the bearing will be damaged when it is
pressed in.
Grease new shaft seal ring
flush.
Mount lock ring f!}.
✓ The lock ring engages audibly.
Grease new shaft seal ring
flush.
(FE 501 SUS)
Remove shaft seal ring
Remove lock ring f!}.
all the way in from the outside to
p. 350)
all the way in from the outside to
4D
and press it in until it is
O
and press it in until it is
O.