Engine Disassembly; Preparations; Draining The Engine Oil - Husqvarna FE 450 2016 Repair Manual

18.3 Engine disassembl�
18.3.1

Preparations

18.3.2

Draining the engine oil

Danger
Danger of poisoning
inhaling them may result in unconsciousness and
death.
-
Always make sure there is sufficient ventilation
when running the engine.
-
Use an effective exhaust extraction system when
starting or running the engine in an enclosed
space.
-
Start the engine and check that it is oil-tight.
-
Switch off the engine.
-
Check the engine oil level.
-
Check the coolant level.
-
Execute the initialization run.
Finishing work
-
Take a test ride.
-
Read out the fault memory using the Husqvarna Motorcycles
diagnostics tool.
-
Check the engine for leak tightness.
-
Check the engine oil level.
-
Check the coolant level.
-
Install the engine guard.
-
Mount the special tool on the engine assembly stand.
Holder and fitting for work stand (78029002000)
Engine work stand (80329001000)
Mount the engine on the special tool.
• Info
I
Work with an assistant or a motorized hoist.
-
Remove the kick starter.
O
-
Remove oil drain plug
Exhaust gases are toxic and
(l!!,!I p. 257)
(l!!,!I p. 254)
(l!!,!I p. 271)
(l!!,!I p. 257)
(0 p. 254)
(0 p. 50)
(�
(0 p. 363)
with the magnet and seal ring.
18 ENGINE
p. 361)
181