Removing The Force Pump; Removing The Primary Gear; Removing The Freewheel Gear - Husqvarna FE 450 2016 Repair Manual

18 ENGINE
18.3.32
18.3.33
18.3.34
194

Removing the force pump

Removing the primary gear

Removing the freewheel gear

O.
-
Remove screws
-
Take off oil pump cover@.
CD
-
Remove internal rotor
-
Remove the pin.
0
-
Push oil pump shaft
from the ignition side.
O
-
Insert special tool in the crankshaft.
I Protection cap (75029090000)
8.
Install special tool
I Puller (75029021000) (a
-
Hold it using the special tool and pull off the primary gear by
turning the screw in.
-
Remove the special tools.
O.
-
Remove woodruff key
-
Take off freewheel gear@.
e.
and external rotor
inward and take it out of the engine
(a p. 360)
p. 358)
•
•