Changing The Rear Wheel Bearing; Guideline; Nm Loctite (10.3 Lbf Ft) - Husqvarna FC 450 2014 Repair Manual

WHEELS
14
14.6.12

Changing the rear wheel bearing

Remove screw connections (D. Remove the rear sprocket.
Position the new rear sprocket. Mount and tighten fittings.

Guideline

Nut, rear sprocket screw
Slide the new engine sprocket
Mount the new chain.
Connect the chain with connecting link
Have an assistant operate the rear brake.
Mount and tighten screw
Guideline
Screw, engine sprocket
Position the engine sprocket cover.
Mount and tighten screw&.
Guideline
I
Screw, clutch slave cylinder
Mount and tighten screw (!}.
Guideline
I
Remaining screws, chassis
Finishing work
Install the rear wheel. (- p. 95)
Remove the motorcycle from the lift stand. (- p. 10)
Preparatory work
Raise the motorcycle with a lift stand. (- p. 10)
Remove the rear wheel. (- p. 95)
MB 35 Nm
(25.8 lbf ft)
0
onto the countershaft.
C,.
8
with the washer.
M10 60 Nm
(44.3 lbf ft)
M6
MB
102
Loctite ® 2701
TM
Loctite 2701
® TM
110 Nm (7.4 lbf ft)
I I
25 Nm (18.4 lbf ft)