Removing The Oil Pressure Regulator Valve; Checking Spring Length Of Oil Pressure Regulator Valve - Husqvarna FE 450 2016 Repair Manual

18.4.3

Removing the oil pressure regulator valve

18.4.4

Checking spring length of oil pressure regulator valve

Guideline
Screw, oil spray
tube
-
Mount the dowels.
-
Blow compressed air through all oil channels and check that
they are clear.
-
Remove screw plug
-
Remove pressure spring
304671-10
Preparatory work
-
Remove the oil pressure regulator valve.
Main work
-
Measure the spring length of the oil pressure regulator valve.
Oil pressure regulator valve
Minimum length of pres-
sure spnng
If the measured value does not meet specifications:
-
Change the spring.
200155-10
Finishing work
-
Install the oil pressure regulator valve.
M4 5 Nm (3. 7 lbf ft)
Loctite
O 8.
with sealing washer
e.
CD
and ball
(!!;!l p. 201)
24.5 mm (0.965 in)
1
(� p. 202)
18 ENGINE
®
243
™
41
201