Removing the s ring
Info
The operations are the same on both fork legs.
201722-11
-
Remove upper sliding bushing
Info
Without using a tool, pull the stack slightly apart by
hand.
-
Take off lower sliding bushing@.
4B.
-
Take off support ring
48.
-
Take off seal ring
@.
-
Take off lock ring
CS,.
-
Take off dust boot
-
Unclamp the fork leg.
Preparatory work
-
Disassemble the fork legs.(� p. 21)
Main work
-
Pull the spring downward. Mount the open end wrench on
the hexagonal part.
-
Clamp the open end wrench in the vise. Release screw
O
cap
but do not remove it yet.
I
Mounting tool (T14047)
-
Pull the spring downward. Remove the open end wrench.
-
Remove the screw cap.
-
Remove the spring with the preload spacer(s).
6 FORK, TRIPLE CLAMP
@).
(�
p. 367)
23