Husqvarna FE 450 2016 Repair Manual page 128

14 WHEELS
� �
126
60�
s>�
e
�◊)
H00936-10
Warning
Danger of accidents
reduce the braking effect.
-
Always lay the wheel down in such a way that
the brake disc is not damaged.
Holding the rear wheel, withdraw the wheel spindle. Take
the rear wheel out of the swingarm.
Info
Do not operate the foot brake lever when the rear
wheel is removed.
(FE 501 SUS)
Press the brake caliper onto the brake disc by hand in
order to push back the brake piston.
Info
Make sure when pushing back the brake piston
that you do not press the brake caliper against the
spokes.
O.
Remove nut
Remove chain adjuster
enough to allow the rear wheel to be pushed forward.
Push the rear wheel forward as far as possible. Remove
the chain from the rear sprocket.
Info
Cover the components to protect them against
damage.
Holding the rear wheel, withdraw the wheel spindle. Take
the rear wheel out of the swingarm.
Info
Do not operate the foot brake lever when the rear
wheel is removed.
8.
Remove spacers
Damaged brake discs
fD
8.
Pull out wheel spindle far