Husqvarna FE 450 2016 Repair Manual page 254

19 CLUTCH
252
C,
Fill bleeding syringe with the appropriate hydraulic fluid.
Syringe (50329050000)
Brake fluid DOT 4 (il,) p. 348)
-
On the clutch slave cylinder, remove bleeder screw
C,.
mount bleeding syringe
(FE EU/AU, FE 450/501 US)
Now inject the fluid into the system until it emerges from
CD
drill hole of the master cylinder without bubbles.
Now and then, extract fluid from the master cylinder
reservoir to prevent overflow.
Remove the bleeding syringe. Mount and tighten screws
bleeder screw.
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level below container
rim
Position the cover with the membrane. Mount and tighten
the screws.
Info
Clean up overflowed or spilled brake fluid immedi­
ately with water.
(FE 501 SUS)
Now inject the fluid into the system until it emerges from
CD
drill hole of the master cylinder without bubbles.
Now and then, extract fluid from the master cylinder
reservoir to prevent overflow.
Remove the bleeding syringe. Mount and tighten screws
bleeder screw.
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level below container
rim
Position the cover with the membrane. Mount and tighten
the screws.
Info
Clean up overflowed or spilled brake fluid immedi­
ately with water.
(lal p. 354)
0
4 mm (0.16 in)
4 mm (0.16 in)
and
..