Checking The Headlight Setting; Adjusting The Headlight Range - Husqvarna FE 450 2016 Repair Manual

Checkin the headli
17.7 Adjustin the headli
17 LIGHTING SYSTEM, INSTRUMENTS
Switching off the service interval display
-
Press and hold the left button.
✓ off appears on the display.
401914-01
-
Position the vehicle upright on a horizontal surface in front of
a light wall and make a mark at the height of the center of the
low beam headlight.
-
Make another mark at a distance
I
Guideline
Cs)
Distance
-
Position the vehicle vertically at a distance
wall.
400726-10
I
Guideline
e
Distance
-
The rider now sits down on the motorcycle.
-
Switch on the low beam.
-
Check the headlight setting.
The boundary between light and dark must be exactly on
the lower mark for a motorcycle with rider.
If the light-dark border does not meet specifications:
-
Adjust the headlight range.
Preparatory work
-
Check the headlight setting.
Main work
(FE EU/AU, FE 450/501 US)
-
Loosen screw
-
Adjust the headlight range by pivoting the headlight.
Guideline
The boundary between light and dark must be exactly
on the lower mark for a motorcycle with driver (instruc­
tions on how to apply the mark: Checking the headlight
setting).
Info
A change in weight on the vehicle may require a
correction of the headlight range.
-
Tighten screw
Cs)
under the first mark.
15
cm (2 in)
t)
15
m (16 ft)
(0 p. 169)
(0 p. 169)
O.
O.
away from the
169