Changing The Main Fuse - Husqvarna FE 450 2016 Repair Manual

Changing the main fuse

Warning
Fire hazard Incorrect fuses overload the electrical system.
-
Only use fuses with the required ampere value.
-
Do not bypass or repair fuses.
Info
The main fuse protects all power consumers of the vehicle. It is located in the starter relay housing
under the air filter box lid.
15 WIRING HARNESS, BATTERY
Preparatory work
(FE EU/AU)
-
Press and hold the kill switch � while the engine is idling
until the engine stops.
(FE 450/501 US)
-
Press and hold the kill switch � while the engine is idling
until the engine stops.
-
Remove the air filter box cover.
Main work
-
Take off protection caps
-
Remove faulty main fuse@.
Info
You can recognize a faulty fuse by a burned-out fuse
wireG.
(D
A spare fuse is located in the starter relay.
-
Install a new main fuse.
I
Fuse (58011109120) (�
-
Check that the electrical system is functioning properly.
• Tip
I
Insert a spare fuse so that it is available if needed.
-
Mount the protection caps.
Finishing work
-
Install the air filter box cover.
(� p. 93)
O.
p. 278)
(ilill p. 93)
143