Checking The Clutch - Husqvarna FE 450 2016 Repair Manual

18.4.34

Checking the clutch

O
-
Check clutch push rod
If there is damage or wear:
Change the clutch push rod.
Place clutch push rod @} on a flat surface and check for run-out.
If there is run-out:
Change the clutch push rod.
(D
-
Check spring retainer
If there is damage or wear:
Change the spring retainer.
C,
-
Check pretension ring
If there is damage or wear:
Change the pretension ring.
0
-
Check spring washer
If there is damage or wear:
Change the spring washer.
-
Check the contact surface of pressure cap
If there is damage or wear:
Change the pressure cap.
-
Check clutch center @ for damage and wear.
If there is damage or wear:
Change the clutch center.
-
Check damping rubber pieces
If there is damage or wear:
Change the damping rubber pieces.
-
Check inner clutch hub Q) for damage and wear.
If there is damage or wear:
Change the inner clutch hub.
-
Check the thrust surfaces of the clutch facing discs in clutch basket � for damage and wear.
for damage and wear.
for damage and wear.
for damage and wear.
for damage and wear.
(D
for damage and wear.
fD
for damage and wear.
18 ENGINE
311354-10
219