Installing The Freewheel Gear; Installing The Primary Gear; Installing The Force Pump - Husqvarna FE 450 2016 Repair Manual

18 ENGINE
18.5.7
18.5.8
18.5.9
232

Installing the freewheel gear

Installing the primary gear

Installing the force pump

-
Mount the 0-ring on the countershaft.
-
Lightly grease and mount spacer @.
O.
-
Mount freewheel gear
O.
-
Mount woodruff key
-
Degrease the cone and thinly apply thread locker to it.
I Loctite 648
® ™
8.
Mount primary gear
Info
Turn the freewheel gear to ease engagement.
Oil the oil pump shaft, internal rotor and external rotor before
assembly.
I
Engine oil (SAE 1 0W/50)
O.
-
Mount oil pump shaft
8.
-
Mount pin Slide on the internal rotor with the marking
facing outward.
8
-
Mount external rotor
Info
The marking should not be visible after installation.
(!!l p. 348)
with the marking facing inward.