Changing the fuses of individual �ower consumers
Info
The fuse box containing the fuses of individual power consumers is located under the seat.
15 WIRING HARNESS, BATTERY
Preparatory work
(FE EU/AU)
-
Press and hold the kill switch C>9 while the engine is idling
until the engine stops.
(FE 450/501 US)
-
Press and hold the kill switch C>9 while the engine is idling
until the engine stops.
-
Remove the seat.
(�
p. 98)
Main work
(FE EU/ AU, FE 450/501 US)
-
Open fuse box cover
-
Remove the defective fuse.
Guideline
Fuse 1 - 10 A - EFI control unit
Fuse
- 10 A- fuel pump
2
Fuse
- 10 A - high beam, low beam, parking light, tail
3
light, license plate lamp
Fuse
- 10 A - horn, brake light, turn signal, radiator
4
fan
- 1 0 A - spare fuses
Fuses
res
Info
e.
You can recognize a faulty fuse by a burned-out
fuse wire
Warning
Fire hazard
cal system.
-
Only use fuses with the required ampere
value.
-
Do not bypass or repair fuses.
-
Use spare fuses with the correct rating only.
I Fuse (75011088010)
O.
Incorrect fuses overload the electri
(�
p. 278)
141