Husqvarna FE 450 2016 Repair Manual page 182

18 ENGINE
180
-
Position the intake air temperature sensor.
-
Mount and tighten screws�-
Guideline
Screw, intake air
temperature sensor
-
Plug in connector fJ).
-
Position the protection cap.
-
Position and tighten hose clip ...
-
Connect negative cable � of the battery.
Guideline
Screw, battery termi-
nal
e
• Info
I
Contact disk must be mounted between screw �
and cable lug • with the claws facing downward.
-
Refill the coolant. (a p. 256)
-
Install the main silencer.
-
Remove the motorcycle from the lift stand.
(FE 501 5 US)
-
Install the activated charcoal filter.
-
Install the fuel tank. (a p. 101)
-
Mount the seat. (a p. 98)
@)
-
Remove oil filler plug
engine oil.
Engine oil
-
Mount and tighten filler plug
M5 2 Nm (1.5 lbf ft)
M5 2.5 Nm (1.84 lbf ft)
(a p. 88)
(a p. 14)
(a p. 110)
on the clutch cover and fill up with
1.50 I Engine oil
(1.59 qt.) (SAE 1 0W/50)
(0 p. 348)
@).