Husqvarna FE 450 2016 Repair Manual page 34

6 FORK, TRIPLE CLAMP
�==�·
�111111ii==�----�=====-
32
Main work
-
Mount and grease seal rings
I Lubricant (T158)
-
Mount and lubricate pilot bushings
I Fork oil (SAE 4) (48601166S1)
R00029-11
-
Check the length of the reservoir spring.
Guideline
Reservoir spring length with
preload spacer
If the length is out of tolerance:
-
-
Position the spring with the preload spacers in the reservoir.
-
Position sleeve
R00028-11
-
Clamp cartridge with special tool.
I Clamping stand (T14049S)
0)
✓
-
Slide reservoir
-
Mount lock ring (D.
-
Mount seal ring retainer@ with the washer and tighten.
Guideline
Seal ring
retainer
-
Unclamp the cartridge.
- ·; -
Slide piston rod
-
Mount spring seat
R00024-10
O
and O-ring
(� p. 350)
(� p. 348)
46 mm (1.81 in)
Correct the preload spacers.
8
in the reservoir.
(� p. 368)
0
onto the cartridge.
Info
Hold the sleeve in the reservoir to prevent it from slid­
ing out.
M23.5x0.75
fD
into the cartridge.
Info
Check that the piston ring is correctly seated.
0.
@}.
@).
46 Nm (33.9 lbf ft)
®
Loctite 2701 TM