Changing The Connecting Rod, Conrod Bearing, And Crank Pin - Husqvarna FE 450 2016 Repair Manual

18.4.12

Changing the connecting rod, conrod bearing, and crank pin

-
Warm up the new timing chain sprocket and immediately
push it onto the crankshaft.
I Guideline
mo c (356 °F)
0
304701-10
Main work
-
Position the crankshaft with special tool
I
Separator plate (78029009100)
-
Press the crank pin out of the upper crankweb with special
tool@.
I
Crankshaft pressing tool (75029047000)
• Info
I
Hold the lower crankweb.
-
Remove the connecting rod and bearing.
-
Press crank pin
304715-10
O
in the press.
(ll!:!l p. 362)
(�
fD
out of the lower crankweb.
18 ENGINE
41
p. 359)
205