Husqvarna FE 450 2016 Repair Manual page 152

16 BRAKE SYSTEM
150
-
Check that leaf spring (3 in the brake caliper and sliding
plate @ in the brake caliper support are seated correctly.
-
Insert the new brake linings, insert pin
8.
pins
• Info
I
Always change the brake linings in pairs.
-
Operate the hand brake lever repeatedly until the brake lin­
ings are in contact with the brake disc and there is a pressure
point.
(FE EU/AU, FE 450/501 US)
-
Correct the brake fluid quantity to level 6).
Guideline
O
Level (brake fluid level
below reservoir rim)
I
Brake fluid DOT 4 (a
8
-
Position cover with membrane
-
Mount and tighten screws
Info
Clean up overflowed or spilled brake fluid immedi­
ately with water.
(FE 501 SUS)
-
Correct the brake fluid quantity to level 6).
Guideline
O
Level (brake fluid level
below reservoir rim)
I
Brake fluid DOT 4 (a
8
-
Position cover with membrane
-
Mount and tighten screws
0,
and mount cotter
5 mm (0.2 in)
p. 348)
8.
O.
5 mm (0.2 in)
p. 348)
8.
O.