Removing The Swingarm - Husqvarna FE 450 2016 Repair Manual

9 SHOCK ABSORBER, SWINGARM
9.29
78
H01898-01
Removin the swingarm
Main work
Move the swingarm up and down.
If there is detectable play:
Change the swingarm bearing.
Move the swingarm from one side to the other.
If there is detectable play:
Change the swingarm bearing.
Finishing work
Remove the motorcycle from the lift stand.
Preparatory work
Raise the motorcycle with a lift stand.
Remove the rear wheel. (ll1ll
Main work
-
Take the brake line out of the guide.
Push the brake caliper forward, slip it out, and hang it to the
side.
Info
Cover the components to protect them against dam­
age.
O
Remove screws and
-
Take off the engine sprocket cover.
(I!!:! p. 81)
(I!!:! p. 81)
(e:,!I p. 14)
(ll1ll p. 14)
p. 125)
8.