18 ENGINE
18.5.39
18.5.40
248
Installing the clutch push rod
Installing the oil screen
0-
-
Mount clutch push rod
-
Mount and tighten engine oil screen plug
Guideline
Screw plug, engine
oil screen
-
Push the oil screen with O-rings onto a pin wrench.
-
Push the pin wrench through the opening into the drill hole of
the opposite engine case wall and push the oil screen as far
as possible into the engine case.
-
Mount and tighten engine oil screen plug @ with the O-ring.
Guideline
Screw plug, engine
oil screen
-
Mount and tighten the oil drain plug
the new seal ring.
Guideline
Oil drain plug with
magnet
O
with the O-ring.
M20x1.5
15 Nm (11 .1 lbf ft)
M20x1.5
15 Nm (11.1 lbf ft)
8
with the magnet and
M12x1.5
20 Nm (14.8 lbf ft)
..
..