Assembling The Damper - Husqvarna FE 450 2016 Repair Manual

9 SHOCK ABSORBER, SWINGARM
9.23
70
201422-10
Assemblin the damper
-
Grease the thread of the piston rod.
I Lubricant (T152) (� p. 350)
-
Mount and tighten nut Q).
Guideline
I
I Nut, piston rod
Preparatory work
-
Assemble the seal ring retainer.
-
Assemble the piston rod.
Main work
-
Lubricate the O-rings of the compression adjuster.
I Lubricant (T158) (l!!l p. 350)
-
Lubricate the threads.
I Lubricant (T159) (a p. 350)
-
Mount the piston with the spring.
-
Mount and tighten the compression adjuster
Guideline
Compression
adjuster
-
Clamp the damper in a bench vise.
Guideline
I Use soft jaws.
8
-
Mount adjusting ring
Info
The adjusting ring cannot be mounted after the piston
rod is mounted.
-
Fill the damper cartridge about half full.
I Shock absorber fluid (SAE 2.5) (50180751 S1)
CD
-
Lubricate O-ring of the seal ring retainer.
I Lubricant (T158) (a p. 350)
-
Mount the piston rod carefully.
I
M16x1 45 Nm (33.2 lbf ft)
(l!!l p. 67)
(l!!l p. 68)
0-
M31x1 45 Nm (33.2 lbf ft)
with the intermediate washer.
(a p. 349)