Husqvarna FE 450 2016 Repair Manual page 239

0
-
Position spring retainer
(D
-
Mount screws and tighten in a crisscross pattern.
Guideline
Screw, clutch spring
retainer
-
Using a straightedge and the special tool, check the spring
washer for distortion.
I
Feeler gauge (59029041100)
Spring washer distortion
If the specified value is not reached:
(D
-
Remove screws
with marking II.
-
Using a straightedge and the special tool, check the spring
washer for distortion.
I
Feeler gauge (59029041100)
Spring washer distortion
If the specified value is not reached:
(D
Remove screws
with marking Ill.
-
Using a straightedge and the special tool, check the spring
washer for distortion.
I
Feeler gauge (59029041100)
Spring washer distortion
If the specified value is not reached:
-
Change the clutch facing discs.
with marking I.
M5 6 Nm (4.4 lbf ft)
(� p. 357)
0 ... 0.10 mm (0 ...
0.0039 in)
and mount the spring retainer
(I!!:! p. 357)
0 ... 0.10 mm (0 ...
0.0039 in)
and mount the spring retainer
(� p. 357)
0 ... 0.10 mm (0 ...
0.0039 in)
18 ENGINE
237