Husqvarna FE 450 2016 Repair Manual page 261

21
Mount and tighten screw plug
and the O-rings.
Guideline
Screw plug, gear oil
screen
C,
-
Position oil screen with the O-rings on a pin wrench.
-
Position the pin wrench through the drilled hole of the screw
plug in the opposite section of the engine case.
-
Push the oil screen all the way into the engine case.
-
Mount and tighten screw plug
Guideline
Screw plug, engine
oil screen
-
Mount and tighten the oil drain plug
a new seal ring.
Guideline
Oil drain plug with
magnet
0.
-
Remove screws Remove the oil filter cover with the O­
ring.
(D
Pull oil filter out of the oil filter housing.
I
Lock ring plier (51012011000)
-
Completely drain the engine oil.
-
Thoroughly clean the parts and sealing area.
LUBRICATION SYSTEM
8
with the gear oil screen
M20x1 .5 15 Nm (11.1 lbf ft)
(D
with the O-ring.
M20x1 .5 15 Nm (11.1 lbf ft)
O
with the magnet and
M12x1 .5 20 Nm (14.8 lbf ft)
(� p. 355)
259