9 SHOCK ABSORBER, SWINGARM
Clamp the control lever as shown in the figure.
✓ The
External tank
on
Closed, Damper
and
Oil reservoir
Operate the
✓ The vacuum pump process starts.
✓ Pressure gauge @ drops to the specified value.
I
< 0 bar
✓ The vacuum gauge
14
mbar
Measure distance
II
voir hole with the special tool.
•
I
Depth micrometer (T1 07S)
✓ The floating piston is positioned all the way at the bot
·7
tom.
1
-1
201399-10
When the vacuum pressure gauge reaches the specified
value, turn the
Equalize pressure.
Guideline
14
mbar
✓ The pressure gauge increases to the specified value.
0 bar
When the pressure gauge reaches the specified value, turn
the
Damper
Guideline
0 bar
✓ Oil is pumped into the damper.
✓ The pressure gauge increases to the specified value.
3 bar
When the pressure gauge reaches the specified value, turn
the
Damper
Guideline
3 bar
✓ The pressure gauge drops to the specified value.
0 bar
(D
control lever is
8
on Vacuum,
0
on Vacuum.
On/Off
switch (D.
fD
falls to the specified value.
6)
between the floating piston and reser
(a
p. 364)
Oil reservoir
control lever
8
control lever
to Pressure.
8
control lever to
Vacuum.
0
to
73