18 Engine; Removing The Engine - Husqvarna FE 450 2016 Repair Manual

18.1

Removing the engine

Preparatory work
-
Remove the engine guard.
-
Drain the coolant. (a p. 255)
-
Raise the motorcycle with a lift stand.
-
Remove the right side cover.
-
Remove the main silencer.
(FE 501 SUS)
-
Remove the seat. (a
-
Remove the fuel tank.
-
Remove the activated charcoal filter.
(FE EU/ AU, FE 450/501 US)
-
Remove the seat. (�
-
Remove the fuel tank.
Main work
O.
-
Remove screw
-
Disconnect the negative cable of the battery.
-
Loosen hose clip@.
-
Pull back the protection cap.
-
Unplug connector@).
C,.
-
Remove screws
-
Take off the intake air temperature sensor.
(a p. 50)
(a p. 14)
(Ii.,! p. 97)
(Ii.,! p. 88)
p. 98)
(Ii.,! p. 99)
(� p. 110)
p. 98)
(� p. 99)

18 ENGINE

171