Husqvarna FE 450 2016 Repair Manual page 179

Mount the radiator hose.
Position and tighten hose clip 0).
Mount the throttle valve body.
Position and tighten hose clip @.
Position the clutch slave cylinder with the gasket.
@).
Mount and tighten screws
Guideline
Screw, clutch slave M6
cylinder
Mount the chain.
Connect the chain with connecting link
Guideline
The closed side of the chain joint lock must face in the
direction of travel.
Position the engine sprocket cover.
Mount and tighten screw Ci).
Guideline
Screw, clutch slave M6
cylinder
48.
Mount and tighten screw
Guideline
Remaining screws, M8
chassis
18 ENGINE
10 Nm (7.4 lbf ft)
@).
10 Nm (7.4 lbf ft)
25 Nm (18.4 lbf ft)
177