Husqvarna FE 450 2016 Repair Manual page 264

21 LUBRICATION SYSTEM
262
Danger
Danger of poisoning
inhaling them may result in unconsciousness and
death.
-
Always make sure there is sufficient ventilation
when running the engine.
-
Use an effective exhaust extraction system when
starting or running the engine in an enclosed
space.
-
Start the engine and let it warm up.
-
Check the engine oil pressure.
Engine oil pressure
Engine oil temperature:
80 °C (176 °F)
Engine speed:
1,600 rpm
Engine oil temperature:
80 oc (176 °F)
Engine speed:
6,000 rpm
If the measured value is less than the specification:
-
Check the oil pumps for wear. Check all oil channels
for free flow.
-
Switch off the engine.
Warning
Danger of burns
very hot when the machine is driven.
-
Wear appropriate protective clothing and safety
gloves. In case of burns, rinse immediately with
lukewarm water.
-
Remove the special tools.
-
Insert the oil filter into the oil filter housing.
-
Grease the O-ring of the oil filter cover. Mount the oil filter
cover.
-
Mount and tighten the screws.
I Guideline I
Screw, oil filter cover
Finishing work
-
Check the engine oil level.
Exhaust gases are toxic and
1 bar (15 psi)
1 . 7 bar (25 psi)
Some vehicle components get
I
M5 6 Nm (4.4 lbf ft)
(� p. 257)