Disassembling The Fork Legs - Husqvarna FE 450 2016 Repair Manual

Disassembling the fork legs

Info
The operations are the same on both fork legs.
201700-10
Condition
The fork legs have been removed.
-
Note down the current state of rebound damping
(red adjuster on the right fork leg).
-
Note down the current state of compression
8
damping (white adjuster on the left fork leg).
COMP
-
Open the adjusters on the rebound and compression damp­
ing all the way.
-
Clamp the fork leg in the area of the lower triple clamp.
I
Clamping stand (T1403S)
8.
-
Remove screw Remove adjuster.
-
Loosen the screw cover
I
Mounting tool (T14047)
Info
The cartridge cannot be taken
-
Unclamp the fork leg.
-
Slide the outer tube down. Drain the fork oil.
6 FORK, TRIPLE CLAMP
O
(ll!l p. 367)
8.
(ll!l p. 367)
yet.
off
REB
21