Adding Engine Oil - Husqvarna FE 450 2016 Repair Manual

21 LUBRICATION SYSTEM
260
Addin engine oil
Info
Too little engine oil or poor-quality engine oil results in premature wear of the engine.
-
Lay the motorcycle on its side and fill the oil filter housing to
about ½ full with engine oil.
-
Insert the new oil filter into the oil filter housing.
-
Oil the O-ring of the oil filter cover and mount it with oil filter
cover@.
-
Mount and tighten the screws.
I I
Guideline
Screw, oil filter cover
-
Stand the motorcycle upright.
-
Remove the oil filler plug
cover and fill up with engine oil.
Engine oil
Info
•
I
Too little engine oil or poor-quality engine oil results in
premature wear to the engine.
-
Install and tighten the oil filler plug with O-ring.
Danger
Danger of poisoning
inhaling them may result in unconsciousness and
death.
-
Always make sure there is sufficient ventilation
when running the engine.
-
Use an effective exhaust extraction system when
starting or running the engine in an enclosed
space.
-
Start the engine and check that it is oil-tight.
Finishing work
-
Install the engine guard.
-
Check the engine oil level.
I
M5 6 Nm (4.4 lbf ft)
@)
with the O-ring from the clutch
1.50 I Engine oil
(1.59 qt.) (SAE 1 0W/50)
(8 p. 348)
Exhaust gases are toxic and
(� p. 50)
(� p. 257)