Installing The Suction Pump; Installing The Ignition Pulse Generator - Husqvarna FE 450 2016 Repair Manual

18.5.21

Installing the suction pump

18.5.22

Installing the ignition pulse generator

Guideline
Screw, water pump M6x25
cover
fD
Mount screw and tighten all screws in a crisscross pat­
tern.
Guideline
Screw, water pump M6x55
cover
Oil the internal rotor and external rotor before mounting.
O.
Insert 0-ring
Position pin @} into the oil pump shaft from above.
fD.
Position pin
8
Mount internal rotor and external rotor
✓ The rounded sides of the external rotor face the engine
case.
Position oil pump cover 0). Mount and tighten screws@.
Guideline
Screw, oil pump M5
cover
Position the ignition pulse generator.
• Info
I
Use the outer drill hole pair.
O.
Mount and tighten screws
Guideline
Screw, ignition M5
pulse generator
18 ENGINE
10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)
..
G,.
6 Nm (4.4 lbf ft)
..
Loctite ® 243
™
6 Nm (4.4 lbf ft)
®
Loctite 243
™
239