Removing The Main Silencer; Installing The Main Silencer - Husqvarna FE 450 2016 Repair Manual

10 EXHAUST
Warning
-
88
Removin the main silencer
The exhaust system gets very hot when the vehicle is driven.
Danger of burns
Allow the exhaust system to cool down before performing any work on the vehicle.
Info
Raise the wheel slightly to be able to mount the screw
more easily.
(FE EU)
-
Route cable avoiding stress; connect plug-in connec­
@)
tor on lambda sensor and secure with a new cable
binder.
Finishing work
-
Install the fuel tank. (� p. 101)
-
Install the main silencer.
-
Install the right side cover.
-
Mount the seat. (a p. 98)
-
Remove the motorcycle from the lift stand.
Preparatory work
-
Remove the right side cover.
Main work
O.
-
Disconnect spring
I Spring hook (50305017000)
8
-
Remove screws and take off the main silencer.
Main work
-
Mount the main silencer. Mount screws
tighten yet.
8.
-
Attach spring
I Spring hook (50305017000)
O.
-
Tighten screws
(� p. 88)
(� p. 97)
(a p. 14)
(� p. 97)
(� p. 354)
O
but do not
(0 p. 354)