Husqvarna FE 450 2016 Repair Manual page 46

6 FORK, TRIPLE CLAMP
44
Main work
(FE EU/AU, FE 450/501 US)
O.
-
Loosen screws
Remove screw @} .
-
Loosen and retighten screw
Guideline
Screw, top steering
head
-
Using a plastic hammer, tap lightly on the upper triple
clamp to avoid stresses.
O.
-
Tighten screws
Guideline
Screw, top triple
clamp
-
Mount and tighten screw @} .
Guideline
M8
Screw, top
steering stem
(FE 501 SUS)
O.
-
Loosen screws
8.
-
Remove screw
-
Loosen and retighten screw
Guideline
Screw, top steering
head
-
Using a plastic hammer, tap lightly on the upper triple
clamp to avoid stresses.
O.
-
Tighten screws
Guideline
Screw, top triple
clamp
-
Mount and tighten screw @} .
Guideline
M8
Screw, top
steering stem
Finishing work
-
Check the play of the steering head bearing.
-
Remove the motorcycle from the lift stand.
8.
M20x1 .5 12 Nm (8.9 lbf ft)
M8
17 Nm (12.5 lbf ft)
17 Nm (12.5 lbf ft)
®
Loctite 243
8.
M20x1 .5 12 Nm (8.9 lbf ft)
M8
17 Nm (12.5 lbf ft)
17 Nm (12.5 lbf ft)
®
Loctite 243
(!::! p. 41)
(!:JI p. 14)
™
™